products

Degasser

short description:

In addition to the hydrogen:
Complete sealing technology is used to improve the refining effect and is not affected by the environmental humidity.


Product Detail

Product Tags

Application:

1) In addition to the hydrogen:

Complete sealing technology is used to improve the refining effect and is not affected by the environmental humidity.

2) Slag:

By means of Podfa measurement technology, the slag removal effect of the box-type degassing equipment is over 80% on average. This effect is also demonstrated by the fact that the life of the filter is longer when the filter is used in subsequent processes (e.g., ceramic foam filter).

3) In addition to the base:

Chlorine reacts with basic ions (such as sodium and lithium) and alkaline earth metals (such as calcium) to form salts, which make impurity removal easier. TS seal is more effective than conventional technology in removing alkali for the same reason as hydrogen removal. Chemical equivalent calculation ensures that the chlorine gas input is fully reacted and there is no excess.

Box type degassing equipment greatly improve the purity of the metal, a continuous and reliable quality (not influenced by season), usually used to deal with the strict quality requirements of products, such as: aviation products, need forging casting parts, auto parts, ultra-thin aluminum foil, advanced tanks or special products such as high voltage capacitor foil and shiny foil, etc.

Product Details:

The Type of Degasser

Rotor

Handing Capacity

Static Molten Alumina(kg)

Size(mm)

MDB-15

1

≤15t/h

590

1975x1880x2150

MDB-25

2

≤25t/h

890

2330x1800x2150

MDB-35

2

≤35t/h

1300

2530x2000x2150

MDB-55

2

≤55t/h

1840

2930x2800x2700

MDB-75

3

≤75t/h

2930

3650x2800x2700

Properties:

Complete seal technology innovation

1) "Rapid heating system", a set of highly efficient heating system, can make a large amount of metal quickly reach the set temperature, heating speed up to 20℃/h. At the same time can ensure temperature stability, especially for low flow metal, can guarantee quality, improve productivity. Because heaters are miniaturized, there is more flexibility in the design of the container and the number of heaters to choose from.

2) There are 16 schemes to choose from for the entrance and exit of this device, which can meet customers' different requirements for site layout. Compared with the flow tank degidation which can only be arranged in a straight line, it can save a lot of flow tank, especially for the production line with high flow rate (more than 60t/h).

3) The equipment is small in size and occupies small space (starting from the floor area), which is easy to be placed on the casting line.

4) "lining moulds" and pre-formed refractories make it easier to replace container linings so that the casting linings can be made under good conditions and dried under strict conditions.

5) In consideration of safety, quality and environmental protection, the function of the gas mixing station has been greatly improved. Chlorine and inert gas are controlled by different control cabinets with minimal maintenance (no corrosion). The accurate flow adjustment system can be connected to the monitoring system in the casting area.

 


  • Previous:
  • Next: